Electronics



A vacuum tube consists of an air-evacuated glass envelope that contains several metal electrodes. A simple, two-element tube (diode) consists of a cathode and an anode that is connected to the positive terminal of a power supply. The cathode—a small metal tube heated by a filament—frees electrons , which migrate to the anode—a metal cylinder around the cathode (also called the plate). If an alternating voltage is applied to the anode, electrons will only flow to the anode during the positive half-cycle; during the negative cycle of the alternating voltage, the anode repels the electrons, and no current passes through the tube. Diodes connected in such a way that only the positive half-cycles of an alternating current (AC) are permitted to pass are called rectifier tubes; these are used in the conversion of alternating current to direct current (DC) (see Electricity; Rectification). By inserting a grid, consisting of a spiral of metal wire, between the cathode and the anode and applying a negative voltage to the grid, the flow of electrons can be controlled. When the grid is negative, it repels electrons, and only a fraction of the electrons emitted by the cathode can reach the anode. Such a tube, called a triode, can be used as an amplifier. Small variations in voltage at the grid, such as can be produced by a radio or audio signal, will cause large variations in the flow of electrons from the cathode to the anode and, hence, in the circuitry connected to the anode.

Comments

Popular posts from this blog

Hanaoka Seishu

Brahe, Tycho

Bunsen, Robert Wilhelm